Error Codes for Girbau
Understanding Girbau machine error codes is essential for quick and efficient problem-solving. By being informed and proactive, you can ensure the longevity and optimal performance of your Girbau machine. If you are in doubt, consulting one of our professional Girbau specialists is always the best course of action.
Need assistance?
Call us now on 0115 961 3720 to book an engineer. We’re always here to help
List of Girbau Error Codes
Model: HS-5008
| Error Code | Error |
| ALM/A-* | FAULTY WATER INLET / SLOW FILL |
| ALM/E | MACHINES WITH PUMP DRAIN BLOCKED DRAIN/PUMP |
| ALM/L | LEAKAGE IN THE ELECTROVALVE (failed level sensor) |
| ALM/SL | BATH LEVEL EXCEEDED |
| ALM/C | DEFECT IN TEMP PROBE/DEFECT IN HEATING CIRCUIT |
| ALM/Prob | DEFECT IN TEMP PROBE |
| ALM/BAL | DEFECT IN THE UNBLANCE CONTROL SWITCH (OPEN CIRCUIT) |
| ALM/VAR* | INVERTER ALARMS.SEE INVERTER FAULT CODES |
| VARO | COMMUNICATION ALARM BETWEEN INVERTER AND MICROPROCESSOR |
| VARO | FAULTY INVERTER SUPPLY, FAULTY WIRING BETWEEN MICROPROCESSOR |
| VAR1 | DISCONNECTION OF INVERTER BY SELF-PROTECTION,IF THE ALARM IS PERMANENT INDICATES INVERTER BREAKDOWN |
| VAR2 | FAILURE ON THE COMMUNICATION SYSTEM DETECTED BY THE INVERTER |
| VAR2 | INVERTER BREAK DOWN, MICROPROCESSOR BREAK DOWN |
| VAR3 | OVER CURRENT IN INVERTER |
| VAR3 | MECHANICAL OBSTRUCTION OF THE TRANSMISSION SYSTEM |
| VAR3 | FAULTY INVERTER SUPPLY |
| VAR3 | FAULTY WIRING OR CONN TO MOTOR |
| VAR3 | FAULTY MOTOR |
| VAR3 | FAULTY INVERTER |
| VAR4 | DISCONNECTION OF MOTOR KLIXON |
| VAR4 | MOTOR KILXON OPEN |
| VAR4 | FAULTY INVERTER |
| VAR5 | OVER VOLTAGE IN INVERTER DC LINT CIRCUIT |
| VAR5 | FAULTY INVERTER SUPPLY |
| VAR5 | INVERTER BREAK DOWN |
| VAR6 | OVERHEATING IN INVERTER |
| VAR6 | INVERTER FAN BREAKDOWN/INVERTER |
| VAR7 | FAILURE IN INVERTER |
| VAR7 | FAULTY INVERTER |
| VAR8 | INVERTER BREAKDOWN |
Still struggling with your Girbau machine's error code?
Call us now on 0115 961 3720 to book an engineer. We’re always here to help